Sending after Specifying a Relay Machine ([F-Code TX])
About relay distribution
The Relay Distribution function sends a fax to a relay machine, which distributes the received fax to a pre-registered group of destinations.
Overall communication costs can be reduced by grouping relay stations and destinations by area, compared to the case in which faxes are broadcast to all destinations. This function is useful when broadcasting faxes to distant locations.
The destination machine (the relay machine) needs to have the F-code function.
You need to check both the Relay User Box number specified on the relay machine and the password for relay distribution.
This function cannot be used together with the following functions.
Password TX, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board)
Using as Fax Relay Machine ([Relay User Box]) (Here)
Operation flow
Load the original.
Tap [Scan/Fax] on the main menu of classic style.
Specify the fax number of the relay station.
Tap [Application] - [Fax Setting] - [F-Code TX], and tap [ON].
Enter the [SUB Address] and [Sender ID], and tap [OK].
[SUB Address]: Enter the Relay User Box number.
[Sender ID]: Enter the relay TX password for the relay distribution.
Use the Start key to start transmission.
Faxes received by a relay station are delivered to destinations registered with the relay station.