HomeFaxSending a fax with a password (Password TX)

Sending a fax with a password ([Password TX])

About Password TX

The Password TX is a function that sends a fax with a password. It is used to send faxes to a device on which fax peers are restricted by passwords (a device with Closed Network RX enabled).

  • You can only use this function to communicate with our models supporting the closed network reception (password) function.

  • You need to check the recipient's closed network reception password beforehand.

  • This function cannot be used together with the following functions.
    Relay Distribution, Confidential Communication, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board)

  • Restricting Communication Peers by Password (Closed Network RX) (Here)

Operation flow

  1. Load the original.

  2. Tap [Scan/Fax] on the main menu of classic style.

  3. Specify the destination.

  4. Tap [Application] - [Fax Setting] - [Password TX], and tap [ON].

  5. Enter the Closed Network RX password of the destination, and tap [OK].

  6. Use the Start key to start transmission.