HomeWeb Management ToolRegistering an SMB program

Registering an SMB program

A program can be registered or edited using Web Connection. Although character input is a difficult process using the Touch Panel, it can be carried out easily if you use the computer.

A combination of address information and the scan/fax transmission option settings can be registered in a program.

The following describes the SMB program.

Select [Store Address] - [Program] - [Registration] in user mode or administrator mode of Web Connection. In [Search from Function], select [SMB], and configure the following settings.

Setting	Description
[Name]	Enter the name of the program (using up to 24 characters).
[Destination Information]	Click [Search from List], and select a destination SMB from the list. Click [Check Destination] to check registered address books. If you wish to manually enter a destination SMB, select [Direct Input] and enter the SMB. [Host Address]: Enter the destination computer (host name) or IP address (using up to 253 bytes). [File Path]: Enter the shared folder name of the host specified in [Host Address] (using up to 255 bytes). [User ID]: Enter the name of a user with folder access rights (using up to 64 characters). [Password]: Enter the password (using up to 64 characters, excluding ") to access the folder. Only one destination can be specified.
[Basic Setting]/[Application Setting]	Configure the Scan option settings. For details, refer to Here.
[Limiting Access to Destinations]	Limit access to this destination, if necessary. For details, refer to Here.