HomeDescriptions of Functions / Utility KeysProtocol Setting

Protocol Setting

To display:
  • [Utility]
    • [Administrator]
      • [Network]
        • [TCP/IP Setting]
          • [IPsec]
            • [IPsec Setting]
              • [Protocol Setting]

Specify a protocol used for IPsec communication. Up to 10 protocols can be specified.

Setting

Description

[Protocol Setting]

To register protocol settings, select [ON] (default: [OFF]).

[Name]

Enter the group name with the protocol specified (using 1 to 10 characters, excluding ").

[Protocol Identification Setting]

Select a protocol used for IPsec communication (default: [No Selection]).

[Port No.]

If [TCP] or [UDP] has been selected in [Protocol Identification Setting], specify the port number used for IPsec communication.

[ICMP Message Type]

Specify the ICMP message type when [ICMP] is selected in [Protocol Identification Setting].

[ICMPv6 Message Type]

Specify the ICMP message type when [ICMPv6] is selected in [Protocol Identification Setting].