Configuring Enlarge Display Operations
Displaying the confirmation screen when changing to the Enlarge Display mode
Changing to Enlarge Display cancels the settings configured on the normal screen. When necessary, you can display the screen to check whether to cancel the settings configured on the normal screen and change to the Enlarge Display mode.
Select [Accessibility] - [Enlarge Display Mode Confirmation], and select whether to check a change to the Enlarge Display mode by displaying the screen (default: [OFF]).
The confirmation screen is not displayed when the display is changed to the normal screen.
Displaying the confirmation screen when canceling the Enlarge Display mode
If this machine is not operated in the Enlarge Display mode for a while, the Enlarge Display mode is canceled automatically. When necessary, you can display the screen to check whether to cancel the Enlarge Display mode.
Select [Accessibility] - [System Auto Reset Confirmation], and select whether to check a cancellation of the Enlarge Display mode by displaying the screen (default: [No]). When displaying the screen, select the length of time to display the screen.
Displaying the confirmation screen when resetting settings
If this machine is not operated for a while, settings are reset automatically. When necessary, you can display the screen to check whether to reset settings.
Select [Accessibility] - [Auto Reset Confirmation], and select whether to display the confirmation screen that enables or disables resetting of the settings. (default: [No]). When displaying the screen, select the length of time to display the screen.
Adjusting the time to hold down a key
In the Enlarge Display mode, pressing a key enters one character, and holding down a key starts entering successive characters. This is referred to as a key repeat.
When necessary, change the time from pressing a key to starting a key repeat, and the interval to enter successive characters.
Tap [Accessibility] - [Key Repeat Start/Interval Time].
Setting
Description
[Time To Start]
Change the time to start entering successive characters when holding down a key.
[0.8 sec] is specified by default.
[Interval]
Change the interval to hold down a key and enter successive characters.
[0.3 sec] is specified by default.