HomeScanEncrypting an E-mail and Adding a Digital Signature (S/MIME)

Encrypting an E-mail and Adding a Digital Signature (S/MIME)

S/MIME

S/MIME is one of the E-mail encryption schemes. Using S/MIME encrypts an E-mail sent from this machine, preventing a interception by third parties during transmission. Adding a digital signature to an E-mail provides assurance regarding the authenticity of the sender, and certifies that no data has been falsified.

Operations required to use this function (for the administrator)

Enable the S/MIME mode. To encrypt an E-mail, register the encryption certificate in the E-mail address.

How to configure the setting is explained using Web Connection. For details, refer to Here.

Operation flow

  1. Load the original.

  2. Tap [Scan/Fax].

  3. Select [Application] - [App], and configure [Mail Encryption] and [Digital Signature].

    • To apply E-mail encryption, set [Mail Encryption] to [ON].

    • To add a digital signature, set [Digital Signature] to [ON].

    • If you cannot change [ON] or [OFF] in [Digital Signature], whether to always add a signature is specified by the administrator.

  4. Specify the E-mail address of the destination.

    • To encrypt an E-mail, select an E-mail address with the certificate registered. An E-mail address with the certificate registered is marked by a key-shaped icon.

    • Up to 10 E-mails can be broadcast.

  5. Press the Start key.

    • Tap [Check Setting] before sending, and check the destination and settings as necessary.

    • To redo operations for specifying destinations or option settings, press the Reset key.

    Transmission begins.

    • If you press the Stop key while scanning an original, the scanning process stops, and a list of stopped jobs appears. To cancel scanning of the original, delete inactive jobs from the list.