HomeDescriptions of Functions / Utility KeysLeading Edge Adjustment

Leading Edge Adjustment

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Printer Adjustment]
            • [Leading Edge Adjustment]

Adjust the print start position at the leading edge of the paper relative to the paper discharge direction.

Press the Start key to print a test pattern. Check the test pattern and adjust so that the margin between the leading edge of the paper and the print start position is 3/16 inch (4.2 mm). Repeat adjustments, as required.

Settings

Description

[Paper Type]

Select the type of paper that is used to adjust the start position for printing.

[Adjust Value]

Enter an adjustment value between -3.0 and 3.0 mm by tapping [-] and [+].

[0.0 mm] is specified by default.