HomeDescriptions of Functions / Utility Keys1st Tri-Fold Position Adjustment

1st Tri-Fold Position Adjustment

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [1st Tri-Fold Position Adjustment]

If the tri-fold positions are not located evenly, use this option to adjust the first fold position.

Copy after configuration, then repeat adjustments as required.

Settings

Description

[Paper Size]

Select the size of paper that is used to adjust the fold position.

[Adjust Value]

Enter an adjustment value between -10.0 and 10.0 mm by tapping [-] and [+].

  • [-]: Move the fold position to the left.

  • [+]: Move the fold position to the right.

[0.0 mm] is specified by default.

  • bizhub C658/C558/C458:
    To use this function, the optional Finisher FS-537 SD or the optional Finisher FS-536 SD is required.

  • bizhub C368/C308/C258:
    To use this function, the optional Finisher FS-534 SD is required.

  • Make adjustment while checking paper folded at a displaced position.

  • The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.