Configuring the TWAIN scan environment

Overview

Using the TWAIN driver enables you to use this machine as a scanner by controlling it from a computer connected to the network.

When using the TWAIN scan, follow the below procedure to configure the settings.

1. Configure settings for connecting to the network such as setting of the IP address of this machine

   • For details on configuring the setting, refer to Here.

2. Configure the basic settings for the TWAIN scan

   • For details on configuring the setting, refer to Here.

3. If necessary, configure the following options.

   Purpose	Reference
   Change the time for locking the Control Panel while the TWAIN scan is running.	Here

Configuring the basic settings for the TWAIN scan

On the computer on the network, configure settings necessary for controlling this machine.

1. In the administrator mode, select [Network] - [SNMP Setting], then configure the following settings.

   Settings	Description
   [SNMP]	To use the TWAIN scan function, select [ON] and select the check box of SNMP version you use. [ON] is specified by default.
   [UDP Port Setting]	If necessary, change the UDP port number. In normal circumstances, you can use the original port number. [161] is specified by default.

2. In the administrator mode, select [Network] - [TCP Socket Setting], then configure the following settings.

   Settings	Description
   [TCP Socket]	Select this check box to use the TWAIN scan function. [ON] (selected) is specified by default.
   [Port Number]	If necessary, change the TCP Socket port number. In normal circumstances, you can use the original port number. [59158] is specified by default.